S1.4-0.1K-RJ45 SPD

Home » Products » Surge Protection Device » PSSPD » Portable RJ45 » S1.4-0.1K-RJ45 SPD

Share to:

S1.4-0.1K-RJ45 SPD

It is mainly suitable for electronic equipment in data systems such as routers, servers, and workstations in computer networks, as well as various video surveillance equipment connected through the network. Prevent permanent damage or instantaneous interruption to signaling equipment or systems caused by induced overvoltage, overcurrent and other instantaneous surge voltages caused by lightning strikes or industrial noise.

Availability:

Quantity:



Inquire Add to Basket

Schematic diagram

微信图片_20240511095608

微信图片_20240511095613

Dimension

微信图片_20240511095617

Product Category

Quick Links

Solution

Automotive System

Industrial Instrumentation

USB Interface

Model	S1.4-0.1K-RJ45
According to standards: GB/T18802.11(IEC61643-21)	C2
Nominal voltage (Un）	1.4V
Continuous operating voltage (Uc)	3V
Nominal discharge current (8/20μs) [ln]	500A (line to ground), 100A (line to line)
Voltage Protection Level (Up)[Line to Line]	45V
Voltage Protection Level (Up)[Line to Ground]	300V
Transmission rate	100MHZ/1000MHZ
Insertion loss	≤0.5dB
Response time (t）	≤1ns
Operating temperature range (Tu)	-40℃~+70°C
Protect line	1, 2, 3, 6 lines/1, 2, 3, 4, 5, 6, 7, 8 lines
Applicable network equipment	100MHz Ethernet device/1000MHz Ethernet device or POE device
Maximum load current	0.4A/per pair of lines
Installation method	RJ45 interface plug-in
Shell material	Gray thermoplastic, UL94 V-0
Installation Location	Indoor
Protection level	IP20
Relative humidity	≤95% no condensation

Model	S1.4-0.1K-RJ45
According to standards: GB/T18802.11(IEC61643-21)	C2
Nominal voltage (Un）	1.4V
Continuous operating voltage (Uc)	3V
Nominal discharge current (8/20μs) [ln]	500A (line to ground), 100A (line to line)
Voltage Protection Level (Up)[Line to Line]	45V
Voltage Protection Level (Up)[Line to Ground]	300V
Transmission rate	100MHZ/1000MHZ
Insertion loss	≤0.5dB
Response time (t）	≤1ns
Operating temperature range (Tu)	-40℃~+70°C
Protect line	1, 2, 3, 6 lines/1, 2, 3, 4, 5, 6, 7, 8 lines
Applicable network equipment	100MHz Ethernet device/1000MHz Ethernet device or POE device
Maximum load current	0.4A/per pair of lines
Installation method	RJ45 interface plug-in
Shell material	Gray thermoplastic, UL94 V-0
Installation Location	Indoor
Protection level	IP20
Relative humidity	≤95% no condensation

S1.4-0.1K-RJ45 SPD

Product Category

Quick Links

Solution

Related News

OUR PRODUCTS

ABOUT US

MORE LINKS

CONTACT US

SOCIAL NETWORKS