How to shield the gaps in the power DTU panel?

When treating gap shielding in DTU panels, electrical continuity must be ensured. Use conductive pads, such as wire mesh pads or conductive foam, to fill the gaps with a compression of 30%-50%. Remove paint from the panel-to-housing contact surfaces to expose the metal substrate, or apply a conductive paint coating. Screw spacing should be less than λ/20 (typically less than 5cm) to ensure a tight connection. For display windows, use transparent conductive film (such as ITO) or wire mesh shielding glass. During testing, use a scanning gun to measure the electric field strength at the gaps; it should be less than the limit by 10dB. Gap treatment can improve shielding effectiveness by 20dB.