Support

With over a thousand cooperative customers and 17 years of service experience, we can provide you with everything from model selection to technical support

Home Support FAQ

Which EMC specifications of data center switches comply with in IEC 61000?

Time：2025-09-24 Views：502次

Share：

EMC certification for data center switches must fully comply with the IEC 61000 series standards: IEC 61000-4-2 Electrostatic Discharge requirements: Contact ±8kV, Air ±15kV (Level 4); IEC 61000-4-4 Electrical Fast Transient/Bulk Requirements: Power Port ±2kV, Signal Port ±1kV (Level 4); IEC 61000-4-5 Surge Requirements: Power Line Differential Mode ±2kV, Common Mode ±4kV, Signal Line ±1kV (Levels 3-4); IEC 61000-4-3 Radiated Immunity Requirements: Radiated Field Strength 10V/m from 80MHz to 6GHz; IEC 61000-4-6 Conducted Immunity Requirements: 10V from 0.15MHz to 80MHz; IEC 61000-4-11 Voltage Dip Requirements: 0% Dip 10ms/20ms. The solution uses a full range of EMC devices from Eternity Electronics to meet all the above test requirements.

Previous：What national standards must a PCS (Power Storage System) meet for grid-connected EMC (Electronic Compatibility)?

Next：Does impedance mismatch at the HMI (Human Machine Interface) interface affect EMC (Electronic Performance Management)?

Return

2026-02-09

Specific strategies for low-cost EMC optimization of intelligent low-voltage monitoring units are listed, including integrated components, PCB optimization, software filtering, and substitution of domestically produced components.

How to adapt the intelligent low-voltage monitoring unit to EMC in industrial low-voltage environments?

2026-02-09

This section describes the technical solution for adapting intelligent low-voltage monitoring units to EMC requirements in industrial low-voltage environments through rigorous interference protection, wideband filtering, and enhanced testing.

How can the initial design of intelligent low-voltage monitoring units avoid the need for later rectification?

2026-02-09

A technical strategy to avoid the need for later rectification of intelligent low-voltage monitoring units by incorporating EMC design throughout the entire process, including design review and simulation verification.

Surge Protective Device

Energy infrastructure

Patent Qualifications

Production Management

Organizational Structure

Benefits and Compensation

Search jobs

Contact Us

Consultation Hotline：

+86 18721669954

Contact Address：

4th Floor, Building 9, Shuimu Garden, Tus-Caohejing (Zhongshan) Science and Technology Park, No. 199, Guangfulin East Road, Songjiang District, Shanghai

Contact Email：

global@yint.com.cn

沪公网安备31011702889749号

Technical Support：: JijinWeb