Support

What standards must the leakage current and insulation strength of the common mode inductance in medical monitors meet?

28 Click 2025/12/30

How does the common mode inductance in industrial PLC equipment cope with the requirement of wide voltage input (85-265VAC)?

23 Click 2025/12/30

What is the vibration testing standard for common mode inductors used in OBC (On-Board Charger) for new energy vehicles? ​

21 Click 2025/12/30

What special parameter requirements must common mode inductors in 5G base station power supplies meet? ​

19 Click 2025/12/30

What is the relationship between the Curie temperature of the magnetic core and the maximum operating temperature of the common mode inductor? ​

19 Click 2025/12/30

What are the advantages of common mode inductors wound with multi-strand twisted wires at high frequencies? ​

19 Click 2025/12/30

Compared to traditional packaging, how much improvement in vibration resistance does the molded packaging of common mode inductors offer? ​

19 Click 2025/12/30

What is the correlation between the temperature rating of the insulating frame material (such as UL94V-0) and the operating temperature of the common mode inductor?

20 Click 2025/12/30

What is the impact of the skin effect of winding conductors on common mode inductance at a frequency of 100MHz?

19 Click 2025/12/30

What impact does the material of the shielding layer (copper/aluminum) have on the high-frequency suppression effect of common-mode inductance?

18 Click 2025/12/30

What is the difference in installation convenience between the common mode inductance of toroidal cores and EI-type cores?

16 Click 2025/12/30

What frequency band of common mode interference is suitable for suppression using a permalloy magnetic core common mode inductor?

16 Click 2025/12/30

Compared to ferrite products, what is the temperature rise advantage of nanocrystalline magnetic core common mode inductors under high current conditions?

15 Click 2025/12/30

What is the impedance difference between the common mode inductance of MnZn ferrite and NiZn ferrite at a frequency of 30MHz?

14 Click 2025/12/30

What is the difference in the proportion of core loss in common mode inductors at different frequencies?

15 Click 2025/12/30

What is the leakage current limit for common mode inductors used in medical equipment? How can it be tested?

25 Click 2025/12/30

In the AEC-Q200 certification for automotive-grade common mode inductors, what are the specific conditions for temperature cycling testing?

16 Click 2025/12/30

What percentage should the deviation of inductance values among the three phases of a three-phase common-mode inductor be controlled within?

16 Click 2025/12/30

Why is it necessary to control the parasitic capacitance of common-mode inductance in communication lines to be below 10pF?

16 Click 2025/12/30

Under high temperature conditions, how much should the rated current of the common mode inductor be derated? How can the derating curve be obtained?

19 Click 2025/12/30